Full Service Metal Fabrication Since 1935
ISO 9001:2015 NSAI Certified
Home > Blog
shadow

Tank Fabrication

August 26, 2014

When you need a special tank or vessel for chemicals, resins, polymers, coatings and adhesives, or anything else you might want in a tank, you can comfortably turn to BEPeterson for tank fabrication services. Our staff of well trained and experienced engineers and project managers can help you in all phases, from initial design and
Read More


When You Need a Skid Assembly

August 18, 2014

The term, skid assembly, covers a lot of territory. There are skid assemblies for all sorts of products and processes. BEPeterson has been manufacturing metal for industry since 1935. It’s no surprise that we are also experts at designing and building the skid assemblies you need. Properly designed and constructed, your skid assembly will allow
Read More


Pressure Vessels Your Way

August 7, 2014

BEPeterson is a major pressure vessel manufacturer of carbon and stainless steel pressure vessels built to the ASME Boiler and Pressure Vessel Code, Sect VIII, Div I. Our reputation is so good that many purchasers of non-pressure vessels specify us and our ability to work to ASME standards. We also have the ability to build
Read More


Why CRN is required?

July 31, 2014

CRN stands for Canadian Registration Number. It’s the number used to certify pressure vessels in Canada. Similar to the ASME requirements in the USA, and the various certifications in Europe, Canada defines requirements for pressure vessels under their CSA B51 standard. CRNs get complicated because each of the 13 Provinces’ in Canada issues their own.
Read More


BEPeterson supplies Architectural Sculptures for the Pawtucket River Bridge

June 24, 2014

BEPeterson is pleased to announce the shipment of four architectural sculptures being installed on the I-95 Pawtucket River Bridge which carries traffic on I-95 between exits 27 and 28. The decorative sculptures were inspired by Pawtucket’s City Hall. When the installation is complete the sculptures will be lighted at night and will provide travelers a
Read More


BEPeterson installs new CNC-VTL

June 24, 2014

BEPeterson is pleased to announce the installation of a new CNC-VTL. The machine has a 92″ diameter table which can accept a part up to 102″ in diameter. The height under the rail is 80″. The machine is equipped with a 5-tool automatic changer. Dan Szczurko, VP Sales states, “This second large VTL adds to
Read More


Pressure Vessel – Horizontal Holding Tank

June 24, 2014

BEPeterson has shipped a 48″ OD x 72″ 304 L Stainless Steel Pressure Vessel. This is a horizontal holding tank designed for atmospheric pressure @ 150 degrees. The vessel was welding to carbon steel cradle painted with red oxide primer. BEPeterson fabricates Pressure vessels, both ASME code and non-code pressure vessels and tanks.   Pressure
Read More


ASME Pressure Vessel – BEPeterson

June 24, 2014

BEPeterson has recently completed an carbon steel ASME Pressure Vessel to be used as an Exhaust Condensate Tank. The pressure vessel is 36″ OD x 90″ OAL fabricated in carbon steel. It was designed to 15 psi @ 176 degrees. The pressure vessel has one 24″ manway and 8 additional nozzles. The tank will have
Read More


ASME Pressure Vessel – Phase Separator – BEPeterson

June 24, 2014

BEPeterson has recently completed fabrication of an ASME Pressure Vessel which is being used as a Phase Separator. The pressure vessel is 30″ OD x 9’6″ OAL 304 L Stainless steel. The pressure vessel was designed to 150 psi @ 150 degrees. ASME Pressure Vessel – Phase Separator – BEPeterson was last modified: November 5th,
Read More


BEPeterson ships Vacuum Vessel System – Spin Chamber

June 24, 2014

BEPeterson has recently completed a Vacuum Vessel System. This is a spin chamber used to test parts at high speeds in a vacuum. The top lid needs to seal with the spin chamber assembly and the top lid is attached to the lift arm and rides up and down on the lift column. The parts
Read More