ASME Tanks

ASME Tanks

BEPeterson is a holder of the ASME single certification mark and a certificate of authorization.  We design and fabricate vessels in accordance with the requirements of the ASME Boiler and Pressure Vessel Code. 

BEPeterson provides complete ASME engineering design for both ASME code and non-code tank fabrication. BEPeterson is an ASME U, UM, R, S and TUV certified manufacturing facility. CRN registration & CE / PED certification are available upon request.

BEPeterson produces ASME tanks in stainless steel and high alloy materials, such as 200 and 300 series SS, 2205 & 2207 Duplex SS, aluminum, nickel, Hastelloy alloys and carbon steels.

BEPeterson staff of engineers and project managers are available to help our customers in all phases including: initial engineering, layout design, fabrication and final testing. Every tank is manufactured under strict quality standards following ASME protocol. All material test certificates and ASME forms are made available with every tank. Our customers expect the very best and BEPeterson has been proud to establish a culture that delivers on-time quality ASME tanks.

BEPeterson also offers a complete Skid Assembly service. We will design and fabricate structural frames, install vessels, piping, pumps, electrical and misc. equipment. BEPeterson can provide complete testing of your modular skid assembly.

ASME Section VIII and TUV

 

BEPeterson provides complete ASME engineering design for both ASME code and non-code tank fabrication. BEPeterson is an ASME U, UM, R, S and TUV certified manufacturing facility. CRN registration & CE / PED certification are available upon request.

BEPeterson produces ASME tanks in stainless steel and high alloy materials, such as 200 and 300 series SS, 2205 & 2207 Duplex SS, aluminum, nickel, Hastelloy alloys and carbon steels.

BEPeterson staff of engineers and project managers are available to help our customers in all phases including: initial engineering, layout design, fabrication and final testing. Every tank is manufactured under strict quality standards following ASME protocol. All material test certificates and ASME forms are made available with every tank. Our customers expect the very best and BEPeterson has been proud to establish a culture that delivers on-time quality ASME tanks.

BEPeterson also offers a complete Skid Assembly service. We will design and fabricate structural frames, install vessels, piping, pumps, electrical and misc. equipment. BEPeterson can provide complete testing of your modular skid assembly.

ASME Section VIII and TUV

Pressure vessels, which are designed to store and transport gases and liquids under pressure and temperature, have inherent safety risks. BEPeterson is a holder of the ASME single certification mark and a certificate of authorization.  We design and fabricate vessels in accordance with the requirements of the ASME Boiler and Pressure Vessel Code.  Since ASME vessels are widely utilized for the most demanding and critical storing and conveying applications, they must be designed and fabricated by strictly following national board and international safety rules and regulations. 

Partnering with BEPeterson to provide ASME Pressure Vessels that follow the required code protocol is critical. BEPeterson provides complete ASME engineering design for both ASME code and non-code pressure vessel and tank fabrication. As a leading ASME pressure vessel manufacturer, our range of ASME vessels is precision designed and engineered in the following metals :

Technical Specifications

  • Chemical & Agricultural
  • Energy / Oil , Gas, Alternative
  • Military / Defense
  • Resins, Polymers, Coatings & Adhesives
  • Water & Chemical Filtration
  • Process Industries
  • Environmental
  • Plastics & Rubber
  • Hydro-test
  • Radiography
  • He Leak Testing
  • PMI (Positive Material Identification)
  • NDE – PT, MT, UT
  • Dimensional – Fero Arm
  • Ferrite Testing
  • Impact Testing
  • ASME Section 8 Div 1
  • U,R,S & UM stamps
  • TUV
  • ISO 9001:2015 certified
  • CE, PED and CRN upon request
  • Carbon& low alloy Steels
  • 300 series & high temp SS
  • Aluminum
  • Nickel alloys – Monel
  • Inconel & Hastelloy
  • 2205 & 2507 Duplex SS
Vessel Thickness :
Up to 3″ Thickness
Vessel Length :
Up to 100′ OAL
Vessel Pressure Range :
Full Vacuum to 6000 PSI
Vessel Diameter :
Up to 13′ Diameter
Overall Vessel Weight :
Up to 40,000 LBS.
Jacketed Vessels :
Dimpled, Half-pipe, Std.