AVON, Mass. – Sept. 17, 2020 – PRLog — The Invisihead seawater intake & outfall system is environmentally responsible & self-reliant as no O&M (operation & maintenance) work is required. Read More
Fabricating Pressure Vessels for the Advanced Navy SEWIP Program.
AVON, Mass. – June 30, 2020 – PRLog — Naval warships encounter a wide spectrum of threats including. Read More
BEPeterson has recently manufactured two ASME Pressure Vessels to be used in the water filtration industry. The pressure vessels are 60″ OD x 106″ OAH – Designed to 200 PSI @ 200 PSI @ 159 Deg F. Read More
BEPeterson, Inc. manufactures Dissolved Gas Conditioning Tower for U.S. Fish & Wildlife Service. The Dissolved Gas Conditioning Tower is a custom vessel manufactured in 316 stainless steel. Read More
BEPeterson, Inc. manufactured Water Cistern Vessels for JC Cannistraro. The tanks were designed as per the ASME standards for safety factors. Read More
BEPeterson manufactures windboxes and SOFA windboxes for coal and gas wall fired burners manufactured to specific customer design. They include the use of carbon steels and high temperature stainless steel materials. Read More.
BEPeterson manufactures multiple Low NOx Coal Burners for installation in Argentina South America. These are wall fired burners manufactured to specific customer design. They include the use of carbon steels and high temperature stainless steel materials.Read More.
BEPeterson manufactures coal nozzle burner tips for coal and gas wall fired burners manufactured to specific customer design. They include the use of high temperature stainless steel material and overlay protection.Read More.
BEPeterson manufactures an ASME Shell & Tube Heat Exchanger as┬ápart of multi-vessel contract for a nylon process installation.┬áThe vessel dimensions were 22″ OD x 81.5″ Straight Tube Length.┬áRead More.
BEPeterson manufactures a CRN Pressure Vessel and Accumulator – Dust Removal Filter for use┬áin an Ottawa Ontario Canadian research and development facility. The Technical Standards and┬áSafety Authority (TSSA) in Toronto issued CRN’s for the vessels. Read More.
BEPeterson manufactures an ASME Pressure Vessel – Ammonia Tank for┬áuse in a refinery process line. The vessel dimensions are 7′ 6″ ID x 9′ 10″┬áOAL.Read More
BEPeterson supplied ten (10) ASME Stainless Steel steam drum pressure vessels to a coating/converting company as part of a new piece of manufacturing equipment. Read More
BEPeterson is pleased to announce the shipment of multiple PED Pressure Vessels with CE certification issued by Bureau Veritas UK Ltd. The Pressure Equipment Directive (PED) of the EU establishes the standards for the design and fabrication of pressure equipment. Read More
BEPeterson, Inc. has supplied a batch system vacuum chamber to Godfrey & Wing. Godfrey &┬áWing has 65 years of experience and is recognized as the worldwide authority in vacuum┬áimpregnation. Read More
BEPeterson, Inc. was selected as the research vacuum chamber manufacturer for the SPIRou instrument. The SPIRou instrument will be an infrared spectropolarimeter and velocimeter operating within a cryogenic environment at an elevation of 4200 meters. Read more
BEPeterson has recently manufactured an ASME Filter Housing Pressure Vessel to be used in the filtration industry. The pressure vessel is a 60″ ID x 95″ OAL SA-516-70 Filter Housing designed to 50 PSI @ 150 Deg F. Read More
BEPeterson has recently manufactured an ASME Filter Housing Pressure Vessel to be used in the filtration industry. The pressure vessel is a 42″ OD x 75″ OAL SA-516-70 Filter Housing designed to 50 PSI @ 150 Deg F. Read More
BEPeterson is pleased to announce the shipment of an ASME Pressure Vessel – Transformer Oil Drain Tank to PPL Montana.
BEPeterson is pleased to announce the shipment of an ASME Pressure Vessel Skid Assembly to ASCO a division of Emerson Electric in New Jersey.
ASME Certification – When and why do pressure vessels require certification?
Standard code rule is that a vessel 15 PSI or greater in pressure falls under the ASME Code and is required to code stamped. There are additional factors but for the most part, this is the main driving force.
However, this is dependent also on state rules / regulations – Texas is a non-code state such that Texas does not require pressure vessels to be code stamped. It is our understanding that all but 2 states are code states and their rules require ASME code stamps on pressure vessels. Most customers in Texas also have their pressure vessels code stamped due to the fact that if ever a vessel was moved to another state they are covered. There is also an insurance liability risk and premium cost associated with non-code stamped pressure vessels.
BEPeterson holds an ASME certification, as such, we advise customers when designing pressure vessels if it falls under ASME code rules and requires a stamp. It is totally up to the customer to have the vessel stamped. We do have customers who do not code stamp pressure vessels even if the design pressure is greater than 15 PSI. We also fabricate pressure vessels from piping which could fall under aspects of B31.1 and B31.3 piping codes – these pressure vessels are built as per ASME code but not stamped.
When a vessel is code stamped it is registered with the National Board. The U1 forms signed by an authorized ASEM code inspector (AI) are provided to the customer and are filed with the National Board. This provides both a record of documentation and also allows state agencies the ability to verify compliance.
Unless our customer requests otherwise, BEPeterson designs pressure vessels to ASME code even if the pressure vessel will not be stamped based on code rules.
BEPeterson is pleased to announce the shipment of a Filter Pressure Vessel Assembly for the Rage Bulk Corporation, Doylestown, PA. Read More
BEPeterson is pleased to announce the shipment of a Pressure Vessel for TG Gallagher, Cambridge, MA. The pressure vessel is a 6000 gallon water cistern vessel which will be used as a holding tank for an irrigation system.Read More
BEPeterson is pleased to announce the shipment of a Filter Pressure Vessel for the Pall Corporation, Cortland, NY. Read More
BEPeterson is pleased to announce the shipment of a PED Pressure Vessel for Ener-Core. Read More
BEPeterson is pleased to announce that we are now registered on the U.S. federal government’s System for Award Management (SAM). BEPeterson is now eligible for contracts and awards. Read More
BEPeterson has recently completed an ASME Pressure Vessel to be used as a Test Vessel for navel underwater development applications. Read More
Stainless Steel Pressure Vessel – Horizontal Holding Tank BEPeterson. BEPeterson has shipped a 48ÔÇ▓ÔÇ▓ OD x 72ÔÇ▓ÔÇ▓ 304 L Stainless Steel Pressure Vessel. Read More
BEPeterson has recently completed an ASME Pressure Vessel to be used as an Exhaust Condensate Tank.Read More
BEPeterson is pleased to announce the installation of a new CNC-VTL. The machine has a 92″ diameter table which can accept a part up to 102″ in diameter. Read More
BEPeterson is pleased to announce the shipment of four architectural bridge sculptures being installed. Read More
- How a heavy fabricator has reinvented itself – March 17, 2014
- Read the full article at: http://www.thefabricator.com/article/bending/how-a-heavy-fabricator-reinvented-itself
- What makes BEPeterson such a unique heavy metal fabricator -November 2013
- Read the full article at: http://www.manufacturing-today.com/index.php/featured-content/897-be-peterson
- A Plate Rolling Primer – October 12, 2012
- Read the full article at: http://www.thefabricator.com/article/bending/a-plate-rolling-primer
- BEPeterson takes precision roll bending to another level – July 2, 2009
- Read the full article at: http://www.thefabricator.com/article/bending/rolling-it-just-so