- ASME/PED/CRN
- ISO 9001:2015 NSAI Certified
ASME Tanks
ASME Tanks
ASME tanks are vessels constructed in accordance with standard pressure vessel codes that ensure the safe storage and transport of liquids and gases under pressure. BEPeterson holds the ASME single certification mark for safety and quality, plus a certificate of authorization in ASME tank fabrication. We design and fabricate vessels following the ASME Boiler and Pressure Vessel Code requirements.
At BEPeterson, we provide complete ASME tank design and engineering solutions for code and non-code tank fabrication. Our 90,000-square-foot manufacturing facility is ASME U, UM, R, S and TUV-certified. We can also provide CRN registration and CE/PED certification upon request.
Custom ASME Tanks
ASME-code tanks require regulatory compliance with local and international standards. Our custom ASME tanks are designed and precision-engineered in accordance with these guidelines.
Design
BEPeterson has a team of engineers and project managers ready to guide our customers through our metal fabrication process. This includes initial engineering, layout design, fabrication and final testing. All tanks produced from our facility undergo strict quality standards based on the ASME protocol.
On top of design and manufacturing, we also conduct material testing for our ASME tanks. This allows us to provide our customers with material test certification and ASME forms with each product. As an ISO 9001:2015-certified manufacturer, we take pride in our approach to quality management and consistent delivery of products that meet regulatory requirements.
Engineering
Every ASME tank project gets assigned to a dedicated project engineer who oversees the entire process. The engineer reviews and ensures adherence to all required codes and specifications and facilitates testing on all metal fabrication products. Some of our inspection capabilities include:
- Hydrostatic testing
- Ferrite testing
- Impact testing
- Helium leak testing
- Radiography
- Positive material identification
- Nondestructive evaluation — penetrant testing, magnetic particle testing, ultrasonic testing
- Dimensional — fero arm
Industries and Applications
BEPeterson builds ASME tanks that cater to a wide range of industries, such as:
- Agricultural and chemical
- Plastics and rubber
- Environmental
- Polymers, resins, coatings and adhesives
- Energy, oil and gas
- Military and defense
- Process industries
- Water and chemical filtration
International Standard Compliance
Cutting-edge Welding Processes
Rigorous Testing & Inspection
Detailed Reports
International Standard Compliance
- All vessels meet all applicable codes and standards (ASME, PED, and CRN).
- As a trusted ammonia tank manufacturer, BEPeterson delivers products with on time delivery, and to certified ISO 9001 quality standards.
Cutting-edge Welding Processes
- BEPeterson uses modern welding equipment, including submerged arc, which provides efficient and smooth welding of ammonia tanks.
- We meet the most sophisticated weld procedures using TIG, MIG, SAW, SMAW, FCAW with a variety of wire and fluxes.
- Qualified ASME Welders and an extensive radiographic capability support all types of ASME Section VIII code construction.
- Our welding capability is supported by a weld-engineering group consisting of multiple CWIs, and in-process weld inspectors.
Rigorous Testing & Inspection
- Every shell and tube heat exchanger is fully documented and inspected by authorized ASME Inspectors.
Detailed Reports
- BEPeterson provides full documentation, material test certificates, RT, and hydro test reports prior to shipment.
Technical Specifications
- Hydro-test
- Radiography
- He Leak Testing
- PMI (Positive Material Identification)
- NDE – PT, MT, UT
- Dimensional – Fero Arm
- Ferrite Testing
- Impact Testing
- ASME Section 8 Div 1
- U,R,S & UM stamps
- TUV
- ISO 9001:2015 certified
- CE, PED and CRN upon request
- Carbon& low alloy Steels
- 300 series & high temp SS
- Aluminum
- Nickel alloys – Monel
- Inconel & Hastelloy
- 2205 & 2507 Duplex SS
- Vessel thickness: Up to 3″ thickness
- Vessel length: Up to 100′ OAL
- Vessel pressure range: Full vacuum up to 20,000 PSI
- Vessel diameter: Up to 13′ diameter
- Overall vessel weight: Up to 40,000 lbs
- Jacketed vessels: Dimpled, half-pipe, standard
Full Service Metal Fabrication Since 1935
Since 1935 BEPeterson has set the standard for custom metal fabrication of heavy-gauge metal parts and equipment.
