- ASME/PED/CRN
- ISO 9001:2015 NSAI Certified
PED PRESSURE VESSELS
PED Pressure Vessels
BEPeterson is a PED pressure vessel manufacturer. BEPeterson builds PED pressure vessels to the European Pressure Equipment Directive or “PED” which is similar to the ASME Boiler & Pressure Vessel Code.
Both the PED and ASME provide requirements for certain pressure vessels and pressure equipment. The major difference between the ASME Code and the PED; as a directive (European law), PED compliance is mandatory within the European Union (EU). PED is required for pressure retaining equipment and for components being sent to the EU. The PED applies to equipment with pressures above 0.5 bar (approx. 7.25 psi at sea level).
See more at: PED Pressure Vessel Manufactured by BEPeterson

PED Pressure Vessel Manufacturer
BEPeterson can build your PED pressure vessel here in the United States and ship to any country in the European Union with PED certification compliance. To further ensure the quality of our PED vessels, BEPeterson is ISO 9001:2015 certified. All PED vessels are supplied with full documentation including material test reports (MTR’s), Hydrotest reports, RT (xray) test results, and full dimensional reports. BEPeterson is also certified for ASME and TUV.
Recently BEPeterson announced the shipment of a PED Pressure Vessel for Ener-Core. The PED Pressure Vessel is the Thermal Oxidizer which makes up a key component of the Ener-Core Powerstation FP250. This system integrates the Gradual Oxidizer technology with gas turbine technology, offering both pollution control and electricity generation where previously impossible. This PED pressure vessel had a size of 60″ OD x 18.91′ OAL. The material of construction was SA-516-70. The Thermal Oxidizer pressure vessel was designed to 55 PSI @ 400 Deg F.
International Standard Compliance
Cutting-edge Welding Processes
Rigorous Testing & Inspection
Detailed Reports
International Standard Compliance
- All vessels meet all applicable codes and standards (ASME, PED, and CRN).
- As a trusted ammonia tank manufacturer, BEPeterson delivers products with on time delivery, and to certified ISO 9001 quality standards.
Cutting-edge Welding Processes
- BEPeterson uses modern welding equipment, including submerged arc, which provides efficient and smooth welding of ammonia tanks.
- We meet the most sophisticated weld procedures using TIG, MIG, SAW, SMAW, FCAW with a variety of wire and fluxes.
- Qualified ASME Welders and an extensive radiographic capability support all types of ASME Section VIII code construction.
- Our welding capability is supported by a weld-engineering group consisting of multiple CWIs, and in-process weld inspectors.
Rigorous Testing & Inspection
- Every shell and tube heat exchanger is fully documented and inspected by authorized ASME Inspectors.
Detailed Reports
- BEPeterson provides full documentation, material test certificates, RT, and hydro test reports prior to shipment.
Technical Specifications
- Chemical & Agricultural
- Energy / Oil , Gas, Alternative
- Military / Defense
- Resins, Polymers, Coatings & Adhesives
- Water & Chemical Filtration
- Process Industries
- Environmental
- Plastics & Rubber
- Hydro-test
- Radiography
- He Leak Testing
- PMI (Positive Material Identification)
- NDE – PT, MT, UT
- Dimensional – Fero Arm
- Ferrite Testing
- Impact Testing
- Carbon& low alloy Steels
- 300 series & high temp SS
- Aluminum
- Nickel alloys – Monel
- Inconel & Hastelloy
- 2205 & 2507 Duplex SS
- Vessel Thickness :
- Up to 3″ Thickness
- Vessel Length :
- Up to 100′ OAL
- Vessel Pressure Range :
- Full Vacuum to 6000 PSI
- Vessel Diameter :
- Up to 13′ Diameter
- Overall Vessel Weight :
- Up to 40,000 LBS.
- Jacketed Vessels :
- Dimpled, Half-pipe, Std.