- ASME/PED/CRN
- ISO 9001:2015 NSAI Certified
TANK FABRICATION
Tank Fabrication
BEPeterson provides complete ASME engineering design for both ASME code and non-code tank fabrication. BEPeterson is an ASME U, UM, R and S certified manufacturing facility. CRN registration & CE / PED certification are available upon request. BEPeterson is a holder of the ASME single certification mark and a certificate of authorization. We design and fabricate vessels in accordance with the requirements of the ASME Boiler and Pressure Vessel Code.
BEPeterson produces tanks in stainless steel and high alloy materials, such as 200 and 300 series SS, 2205 & 2207 Duplex SS, aluminum, nickel, Hastelloy alloys and carbon steels.
Complete Tank Fabrication Services from Design to Delivery
BEPeterson staff of engineers and project managers are available to help our customers in all phases including: initial engineering, layout design, fabrication and final testing. Every vessel is manufactured under strict quality standards following ASME protocol. All material test certificates and ASME forms are made available with every vessel. Our customers expect the very best and BEPeterson has been proud to establish a culture that delivers on-time quality pressure vessels.
BEPeterson also offers a complete Skid Assembly service. We will design and fabricate structural frames, install vessels, piping, pumps, electrical and misc. equipment. BEPeterson can provide complete testing of your modular skid assembly.
ASME Section VIII and TUV
- Welding to ASME section 9
- Polished and Electro Polished Finish
- Hydrostatically Tested – Vacuum Leak Testing
- Skid Fabrication and Assembly
- Codeware – Compress ASME code calculation software
Technical Specifications
- Chemical & Agricultural
- Energy / Oil , Gas, Alternative
- Military / Defense
- Resins, Polymers, Coatings & Adhesives
- Water & Chemical Filtration
- Process Industries
- Environmental
- Plastics & Rubber
- Hydro-test
- Radiography
- He Leak Testing
- PMI (Positive Material Identification)
- NDE – PT, MT, UT
- Dimensional – Fero Arm
- Ferrite Testing
- Impact Testing
- ASME Section 8 Div 1
- U,R,S & UM stamps
- TUV
- ISO 9001:2015 certified
- CE, PED and CRN upon request
- Carbon& low alloy Steels
- 300 series & high temp SS
- Aluminum
- Nickel alloys – Monel
- Inconel & Hastelloy
- 2205 & 2507 Duplex SS
- Vessel Thickness :
- Up to 3″ Thickness
- Vessel Length :
- Up to 100′ OAL
- Vessel Pressure Range :
- Full Vacuum to 6000 PSI
- Vessel Diameter :
- Up to 13′ Diameter
- Overall Vessel Weight :
- Up to 40,000 LBS.
International Standard Compliance
Cutting-edge Welding Processes
Rigorous Testing & Inspection
Detailed Reports
International Standard Compliance
- All vessels meet all applicable codes and standards (ASME, PED, and CRN).
- As a trusted ammonia tank manufacturer, BEPeterson delivers products with on time delivery, and to certified ISO 9001 quality standards.
Cutting-edge Welding Processes
- BEPeterson uses modern welding equipment, including submerged arc, which provides efficient and smooth welding of ammonia tanks.
- We meet the most sophisticated weld procedures using TIG, MIG, SAW, SMAW, FCAW with a variety of wire and fluxes.
- Qualified ASME Welders and an extensive radiographic capability support all types of ASME Section VIII code construction.
- Our welding capability is supported by a weld-engineering group consisting of multiple CWIs, and in-process weld inspectors.
Rigorous Testing & Inspection
- Every shell and tube heat exchanger is fully documented and inspected by authorized ASME Inspectors.
Detailed Reports
- BEPeterson provides full documentation, material test certificates, RT, and hydro test reports prior to shipment.
