Blog

BEPeterson has shipped a 48″ OD x 72″ 304 L Stainless Steel Pressure Vessel. This is a horizontal holding tank designed for atmospheric pressure @ 150

BEPeterson has recently completed an carbon steel ASME Pressure Vessel to be used as an Exhaust Condensate Tank. The pressure vessel is 36″ OD x 90″ OAL

BEPeterson has recently completed fabrication of an ASME Pressure Vessel which is being used as a Phase Separator. The pressure vessel is 30″ OD x 9’6″ OAL

Pressure vessels are closed tanks or containers designed to function at pressures higher than air pressure, usually 15psi, and hold gases or liquids inside at

Pressure Equipment Directive or PED is a standard set by the European Union (EU) for the design and fabrication of pressure equipment. The standards that

Pressure vessels are large containers that are used to hold gases or liquids at high temperatures. The contents of pressure vessels are at substantially different

Pressure vessels are designed to store, or transport gasses and liquids under various pressures and temperatures. These vessels must be fabricated and designed to regulations

Pressure vessels are containers that are specially designed to hold and operate at pressures above 15 pounds per square inch gauge. Pressure vessels with large

Lethal service pressure vessels are used to contain various lethal fluids, which turn extremely dangerous on mixing with air. The pressure vessels used for lethal

Pressure vessels are among the most vital equipment in most industries. These are basically special containers that are designed in a way to hold liquids

At BEPeterson, our goal is to provide superior quality pressure vessels to meet the diverse range of applications in varied industries. Since inception in 1935